QR Code Planet
  1. Home
  2. How QR code tracking works

How QR code tracking works: from scan to redirect

Every scan passes through a short link: we check the code, count the scan and send the person on.

  1. 1ScanThe camera opens qrcodeplanet.com/r/bluebird-menu
  2. 2CheckThe nearest Cloudflare data center looks up the code
    • Blocked?
    • Paused?
    • Schedule
    • Scan limit
    • Smart rules
  3. 3Your pagebluebirdcoffee.example/menu, with your UTM tags
  4. 4CountedAfter the redirect: hour, place, device, unique estimate. IP not stored.
One scan of a dynamic QR code. If our database can’t be reached, the data center’s saved copy still sends the person on; that scan isn’t counted.

Definition

What is QR code tracking?

In shortQR code tracking is counting the scans of a QR code. It works when the code holds a short redirect link: the phone opens the link, the scan is recorded, and the person is sent on to the destination.

Tracking is the process behind each scan. QR code analytics is the report built from those scans: totals, unique scans, trends, places and devices.

Tracking vs analytics

Tracking
What happens during a scan: the short link, the checks, what’s recorded, the redirect
Analytics
The report built from recorded scans
Works with
Dynamic QR codes only
Recorded
Hour, place, device; no IP address, no cookies

How it works

What happens when someone scans a dynamic QR code?

  1. The camera reads a short link

    The pattern holds a link such as qrcodeplanet.com/r/bluebird-menu (or the same path on your own domain on Pro and Agency), not your final address. That’s what lets you change the destination later.

  2. The request reaches the nearest Cloudflare data centre

    The phone opens the link. Our redirect runs on Cloudflare’s network, in the data centre that receives the request, so it’s usually close to the person scanning.

  3. We look up the code and run its checks

    We find the destination you set and check, in order, that the code isn’t blocked for safety, paused, past its end date, outside its schedule or over its scan limit. A stopped code shows a status page, or a backup link if you chose one. Password-protected codes ask for the password. If the code has smart redirect rules (Pro), the first matching rule picks the link.

  4. The scan is counted

    Unless the request is a link preview, crawler or prefetch, we add one to the counters for that hour, country, region, city, device type, system and browser, and estimate whether it’s a unique scan. This is written after the redirect is sent.

  5. The phone goes to your page

    A standard redirect sends the phone on, with your UTM tags or conversion id added if you turned them on. The person needs no app or account and doesn’t see our site. Hosted pages, forms and builder pages open directly on our domain instead.

What is recorded

What information does QR code tracking collect?

Recorded with each scan

  • Day and hourNov 14, 8am
  • Place, from the networkAustin, TX, US
  • Device, system and browserMobile, iOS, Safari
  • CountersOne more scan; one more unique if new today
  • Unique-scan fingerprintOne-way, deleted after about two days

Never stored with a scan

  • IP addressUsed for a moment, never saved
  • Name, phone or accountScanning asks for nothing
  • Cookies or advertising IDsNone set to count scans
  • Links between daysFingerprints change daily
  • What they do on your siteUnless your site reports a conversion

This is about scanning. Your account details, the lead forms people fill in and your own website’s analytics are separate, and covered in the privacy policy.

Unique scans

How do we count unique QR code scans?

For each scan we combine a random key for the day, the code, the network address and the browser’s description of itself, and run them through a one-way hash. If that fingerprint was already seen today, the scan isn’t unique. The key changes every day, and keys and fingerprints are deleted after about two days, so a person’s scans can’t be linked across days, by you or by us.

It’s an estimate, not a head count: phones sharing a network and browser (office or event Wi-Fi) can count as one, and a phone that switches networks or browsers can count twice. More on the metrics in QR code analytics.

Static vs dynamic

Why static QR codes can’t track scans

Static

  1. QR codeThe link is in the pattern
  2. Your websiteOpens directly

The phone goes straight to your site. No one is in the middle, so nothing can count the scan.

Dynamic

  1. QR codeHolds our short link
  2. Our short linkScan counted here
  3. Your websiteOpens right after

The scan passes through us first. It’s counted, and you can change the destination, add smart rules or group codes into campaigns.

A printed static code can’t become dynamic; you’d print a new one. Compare them in static vs dynamic QR codes, or make one with the dynamic QR code generator.

After the scan

What happens after someone scans your QR code?

A scan tells you the code was opened. What the person does on your site is measured by your site, not by us.

UTM tags

Turn them on for a code, or set them once for a campaign. We add them to the link as the phone is sent on, so your analytics tool (Google Analytics, for example) labels the visit with your source, medium and campaign. That visit data stays in your tool.

Conversion tracking (Pro)

Switch it on for a code and scans reach your site with a short qcp id, valid for 30 days. Your site reports an event, such as a purchase or sign-up, with our small script or a server call to the API. Each scan counts an event once, and nothing is counted unless your site reports it.

Reliability

Redirects on a global network

The redirect runs on Cloudflare’s network, so the lookup happens in a data centre near the person scanning, and counting is written after the redirect is sent. Every successful lookup also refreshes that data centre’s saved copy of the code.

If our database can’t be reachedWhat the person sees
The data centre has a saved copyThey’re sent to the destination in that copy. The scan isn’t counted, and very recent changes may not be in the copy yet. Hosted forms and builder pages ask them to try again.
No saved copyA short “This code is fine. Try again in a few seconds” page, not an error.

We don’t promise a specific speed or uptime. Cloudflare provides the network; it doesn’t endorse QR Code Planet.

Bots and previews

Do link previews and bots count as scans?

No. These requests still get the link, but they aren’t counted; they’re shown separately as “automated hits” in Analytics:

  • Link previews that identify themselves, such as WhatsApp, Slack, iMessage, Telegram, X, Facebook, Pinterest and Skype
  • Search crawlers and verified bots
  • Browser prefetches and prerenders
  • Scripts and tools such as curl, Python, headless browsers and uptime monitors

A script that pretends to be a normal phone can still be counted. Detection is rule-based, so counts are close but not perfect.

Privacy

QR code tracking with a privacy-conscious approach

  • Minimal data: counters by hour, place and device, not records of people.
  • No stored IP addresses and no cookies for counting.
  • Short-lived fingerprints: unique-scan fingerprints and their daily keys are deleted after about two days.
  • Approximate location: from the network, never GPS.
  • Your side: your landing page, its analytics and anything you add there are yours to disclose and manage.

Whether your use meets GDPR or other laws depends on your whole setup, your destination and where you operate. This is product information, not legal advice. See our privacy policy and are QR codes safe?

Limits

Tracking limitations

  • Static QR codes can’t be tracked.
  • City is approximate; mobile networks and VPNs can show a nearby place.
  • Unique scans are estimates; repeat scans count toward the total.
  • A scan doesn’t prove someone read the page, bought or signed up.
  • Bot detection is rule-based and can miss scripts posing as phones.
  • Scans served from a saved copy during a database outage aren’t counted.
  • Reports cover the last 12 months.

Use cases

Why QR code tracking matters

  • RestaurantsHow often the menu code is opened, and when.
  • Retail and packagingScans from each package, label and in-store sign.
  • Marketing agenciesOne code per placement, measured separately.
  • EventsPosters, tickets and signs, each with its own count.
  • Real estateYard signs and brochures for each listing.
  • Multi-location businessesA code per branch, compared by city.

Get started

Start tracking your QR code scans

Six steps, a few minutes. The printed code keeps working while you change where it goes.

  1. Open the generatorand choose Website
  2. Pick Dynamicand paste your link
  3. Style itcolors and a logo, if you like
  4. Save it3 dynamic codes are free
  5. Download and printthen put it where people scan
  6. Open Analyticsand watch scans come in

FAQ

Questions people ask

Can’t find yours? A person answers every email within 2 working days.

Email us

How does QR code tracking work?

A dynamic QR code holds a short link to us instead of your website. When it’s scanned, we look up your destination, count the scan and redirect the phone to your page.

Can static QR codes be tracked?

No. A static code holds your link directly, so the phone never contacts us and there’s nothing to count. A printed static code can’t be switched to dynamic; you’d print a new code.

Does QR Code Planet store scanner IP addresses?

No. The address is used for a moment to estimate unique scans through a one-way fingerprint that changes daily and is deleted after about two days. It isn’t stored with the scan.

Can I identify the person who scanned my QR code?

No. Scans are counted as totals by hour, place and device. Nothing in your report points to a person.

Does QR code tracking use cookies?

No. Counting a scan sets no cookie. The only cookie a scan page can set is for a password-protected code, to remember the right password for a day.

Do WhatsApp and other link previews count as scans?

No. Requests that identify themselves as link previews, crawlers, bots or prefetches still get the link but aren’t counted; Analytics shows how many were left out.

Does tracking slow down the redirect?

The scan is written after the redirect is sent, so counting doesn’t hold the phone up. The redirect itself waits for the code lookup, which runs on Cloudflare’s network near the person scanning.

What happens if the database is unavailable?

If the data centre handling the scan has a recent copy of the code, the phone is still sent on, but that scan isn’t counted. With no copy, the visitor sees a short “try again” page.

Can I use Google Analytics with QR Code Planet?

Yes. Turn on UTM tags on a code or a campaign and the visit arrives in your analytics labeled with your source, medium and campaign. Nothing is sent to Google by us.

Can QR Code Planet track purchases and sign-ups?

On Pro, with conversion tracking. Your website reports the event back to us with a small script or a server call. Scans alone are never counted as conversions.

Is QR code tracking GDPR compliant?

We keep scan data minimal: no stored IP addresses, no cookies and no cross-day identifiers. Whether your use is compliant also depends on your landing page, any tracking you add there and where you operate. This is product information, not legal advice.

Can I track a QR code after printing it?

Yes, if it’s a dynamic code: every scan is counted from the moment it’s printed. You can even change where it points without reprinting.

Last checked November 15, 2026

Keep reading

Related